Plastic coated steel wire rope introduction

包塑

This product including ordinary galvanized or stainless steel wire rope then covered with plastic layer. The plastic-coated material including PVC/PU/Nylon. After thermal processing, the plastic and steel wire are firmly bonded together. After plastic coated, the coated steel wire rope has anti-aging and anti-rust functions, and its service life is 2.5 times than ordinary steel wire ropes. High-density raw material particles, non-absorbent surface, resistant to general acid and alkali, suitable for outdoor use. Widely used in all walks of life, agriculture and forestry protection, fish farming, sports products, construction, industry, agriculture, animal husbandry, handicrafts, weaving wire mesh.

The main structure of the plastic coated steel wire rope produced by our factory is 7*7 and 7*19. The steel wire can be galvanized or stainless steel. The plastic-coated material includes PVC/PU/Nylon. The color is generally transparent and colorless, which can be customized according to customer needs. A variety of colors can be customized, and the size can be customized from 1.6mm~10mm or other diameters.

Daily maintenance of plastic coated wire rope:

The material of the coated steel wire rope is divided into carbon steel and stainless steel. Among them, the carbon steel coated steel wire rope has low cost, moderate tension and strength, but it is easy to rust and corrode, and needs regular lubrication.
Stainless steel wire rope has better tension and strength than carbon steel, simple maintenance and no lubrication, but higher cost of use.

The common faults of plastic coated steel wire ropes in use including broken wires, corrosion, corrosion, crushing, sharp turns, scattered strands, individual strand bulges, wear, etc. The most common faults are broken wires and corrosion. Because the wire at the pulley is repeatedly bent and straightened during the transmission, that is, it is often subjected to repeated loads, and it also slides relative to the pulley, so the wire at the pulley is most likely to break. Therefore, the maintenance work should focus on checking the above parts.

The most important way to check the broken wire of the rubber-coated wire rope is to wipe the wire rope with a clean, dry soft cloth without lint along the length of the wire rope and wipe it as quickly as possible, and check the place where the cloth is caught by the broken wire.
In general, if we see rust on the inside, it proves that our plastic coated steel wire rope has been completely damaged, and we will replace it in time. When we do not find any internal rust, we should clean up the external rust in time, so as to avoid affecting other parts from rusting. After removing the rust, we must carry out anti-rust protection to prevent it from being corroded again.


Post time: Feb-23-2022